#Acti ip cam serial#
#Acti ip cam free#
#Acti ip cam windows#

#Acti ip cam serial#

It lists them in column and row format with other useful information like MAC addresses, firmware versions, model numbers with descriptions, and serial numbers. The IP Utility is a useful tool that lets you scan your entire network for Acti cameras.

#Acti ip cam free#

If you are configuring multiple cameras by DHCP at once, it’s more convenient to use Acti’s free IP utility.

To access the cameras IP interface, click on the camera you just added to bring up the log in field and launch the browser. Cameras connected to your LAN will auto populate using the Universal Plug and Play (UPnP) feature on the camera. Click on the icon to see a list of devices connected to your network.

#Acti ip cam windows#

To access your network devices on Windows 7, click on the start menu and search for “network”. The easiest way to find a newly added device is to use Windows’ built in network scanner (see example below). Once you’re done hard-wiring the camera to your network, you can start looking for it. This is important because it will determine how you will find the camera. If DHCP is disabled, the camera will automatically configure itself to IP address 192.168.0.100. Note: If your network has DHCP enabled, the camera will detect it and pull a new IP address. Step 2: Scan your network for the recently added IP cameras PTZ cameras, for example, require significantly more electricity because they have motors. Make sure the electricity on the single port is enough to power your device. The same applies for an injector/midspan. Check to make sure the one you buy matches what the camera requires. Different switches will have different power ratings. A standard bullet camera like the E42 that doesn’t have optical zoom or PTZ capabilities (no motors) typically uses 15.4 watts or less (802.3af). NOTE: When picking a switch, you want to make sure the A) each port has enough electricity to power your camera and B) the overall power budget will be enough for the numbers you’re plugging into the switch. If you still don’t see activity, it could mean the cameras is done talking to the switch or that it’s not receiving electricity. If you don’t see activity (no blinking lights), check your cables and make sure they’re both plugged in properly. Blinking lights are a good indicator that the devices are talking to each other.

Make sure you have activity on both the switch and camera.

Good injectors can cost up to $30 so it might be worth it to some to purchase the switch because it’s a cleaner install. There are some good 4 port PoE switches for less than $100. Since PoE switches are getting cheaper, this might be a good time to purchase a PoE switch if you’re using more than one camera. If your modem doesn’t have a built in router, you’ll need to purchase one. Since most residential modems don’t have PoE ports, you’ll need to purchase a PoE injector or switch and connect it to your switch using one of the built in ports. When you sign up for internet service, your internet company will send an installer who sometimes brings a device that combines these devices into one. In a typical network, you have a modem and router with a switch function. To access the camera from your PC, they’ll need to be on the same network. Since most of Acti’s newer cameras are PoE enabled, and this guide is for the E42A, we’ll assume you are using PoE. If the camera supports it, you can also connect a traditional 12 or 24 volt power supply. 3 Step 3: Access the cameras Step 1: Connect your camera to a PoE injector (midspan) or switch